The F35 error code on a Kenmore washer typically indicates a problem with the Analog Pressure Sensor (APS) or Water Level Pressure Switch. When this error appears, your washer might refuse to start or complete a cycle. Here’s a step-by-step guide to help you troubleshoot and fix the F35 error on your Kenmore washer.
What Does F35 Mean?
The F35 error code indicates an issue with the water level pressure sensor, which monitors the water levels inside the drum. When this sensor isn’t working correctly, the washer can’t properly gauge how much water to add or drain, leading to this error code.
Step-by-Step Guide to Fix the F35 Error Code
Step 1: Power Cycle the Washer
Sometimes, the F35 error is caused by a minor glitch in the system. Try a power cycle:
- Turn off the washer and unplug it from the power source.
- Wait for about 5 minutes to let the washer reset.
- Plug it back in and turn it on. Start a new wash cycle to see if the error reappears.
Step 2: Check the Water Level Pressure Sensor
If the error persists, the water level pressure sensor might be faulty. Here’s how to inspect it:
- Unplug the washer to ensure safety.
- Locate the pressure sensor: It’s usually at the back of the washer, near the control panel.
- Check for loose connections: Ensure the wiring harness connected to the sensor is secure.
- Inspect the sensor for damage: Look for any visible signs of wear, corrosion, or cracks.
If the sensor looks damaged, you may need to replace it.
Step 3: Inspect the Air Tube
The pressure sensor is connected to an air tube that goes to the washer’s tub. If this tube is blocked or damaged, the sensor won’t work correctly.
- Disconnect the air tube from the pressure sensor.
- Blow through the tube to check for blockages.
- If blocked, clean out the tube and reattach it to the sensor.
Step 4: Replace the Pressure Sensor (if necessary)
If troubleshooting doesn’t resolve the F35 error, the pressure sensor may be malfunctioning and need replacement.
- Order a replacement sensor compatible with your Kenmore washer model.
- Follow the installation instructions provided with the part or consult your washer’s user manual.
When to Call a Professional
If the above steps don’t fix the F35 error code, it’s time to contact a professional appliance repair technician. There may be a more complex underlying issue, such as a control board malfunction, that requires specialized tools and expertise.
Conclusion The F35 error code on a Kenmore washer is usually related to the water level pressure sensor. By following these steps, you can often diagnose and resolve the issue on your own. However, for more complex repairs, don’t hesitate to reach us out at (450)350 0986 or book online appointement
